How to fit a 'F' Connector
 |
||
 |
 |
|
|
First cut the cable to the required length.
|
Strip away approximately 15 mm of outer insulation. Next, gather strands of copper braid together and wind back around the outer insulation. If cable is tape and braid, cut tape to be flush with outer insulation.
|
|
 |
 |
|
|
Strip away about half of the inner insulation around the inner copper wire. Check that none of the copper braid is touching the inner copper wire.
|
Feed the inner copper wire through the connector and screw clockwise to tighten.
|
|
 |
||
|
Finally cut off inner copper wire to about 3mm beyond the plug body.
|
||
|
Information & Pictures supplied by Maxview (www.maxview.ltd.uk)
|
||